Mixing board
Mixing board
Is there any good mixing board to Auria that I can use when I mix? It would really help when I work with automation.
Re: Mixing board
Are you looking for a controller board with faders to ride your automation in Auria?
Otherwise a mixing board would be necessary if you go out on individual channels of Auria via Subgroups,Aux,Master into the board for its final mix.
An analogue mixing board with control faders starts from price-point with this http://www.allen-heath.com/ahproducts/zed-r16/
Good Luck!
Otherwise a mixing board would be necessary if you go out on individual channels of Auria via Subgroups,Aux,Master into the board for its final mix.
An analogue mixing board with control faders starts from price-point with this http://www.allen-heath.com/ahproducts/zed-r16/
Good Luck!
iPad 3/16 GB - Alesis Dock - Auria 2.0 - ReTune - Audiobus - JamUp Pro - Alchemy Pro - DM1
Re: Mixing board
Thanks for answer and link!
I like to move some faders instead of just touching the screen when I set the eq, compression, volume, pan etc. So maybe I don't need so many channels.
I like to move some faders instead of just touching the screen when I set the eq, compression, volume, pan etc. So maybe I don't need so many channels.
Re: Mixing board
A controller like this http://global.novationmusic.com/launch/ ... control-xl# could be very helpful. You can map these knobs to control EQ, compressor ...
Good Luck
Good Luck
iPad 3/16 GB - Alesis Dock - Auria 2.0 - ReTune - Audiobus - JamUp Pro - Alchemy Pro - DM1
-
- Expert
- Posts: 111
- Joined: Thu Jan 29, 2015 7:49 pm
- Contact:
Re: Mixing board
The faderport is one that works great an will do what you need and has a motorized fader
http://www.bhphotovideo.com/bnh/control ... &A=details
One of the members here posted a great video Anthony Alves
https://www.youtube.com/watch?v=zq710J9LdF0
http://www.bhphotovideo.com/bnh/control ... &A=details
One of the members here posted a great video Anthony Alves
https://www.youtube.com/watch?v=zq710J9LdF0
Re: Mixing board
Hello everyone. This is my very first post on the Auria Forums although I've been lurking here for over a year. I was just watching a few Behringer videos on the X-Touch and the two that captured my attention were the videos on the X-Touch automation and 3 X-Touch units being cascading in Logic Pro. Since Auria supports Mackie Control, it stands to reason that the X-Touch units would also work in Auria. The links are below...not sure if they will work as this is my first post but if not, just go to YouTube and search for Behringer X-Touch. There are about 15 how to videos.
Cascading
https://www.youtube.com/watch?v=CbjXRZ2I_mk
Automation
https://www.youtube.com/watch?v=rSbgY5srBzM
Cascading
https://www.youtube.com/watch?v=CbjXRZ2I_mk
Automation
https://www.youtube.com/watch?v=rSbgY5srBzM
Who is online
Users browsing this forum: No registered users and 9 guests