For topics specifically about audio interfaces (USB, MFi, Camera Connection Kit)
Moderators: Corey W, Rim
-
sELF
- Expert
- Posts: 75
- Joined: Mon Jun 03, 2013 4:51 pm
- Location: Berlin/London
-
Contact:
Post
by sELF » Sun Nov 01, 2015 8:17 pm
Has anyone used one of these with Auria? Wondering if I can get 8 channels of sound into Auria at the same time! I haven't heard much about this yet? 24/96 sounds good. For a minimal setup like mine! Other than that I'm looking at a Yamaha MG 12 or 16 with stereo 24/96 class compliant output... Or Mr Xmas is gonna buy me an Apogee Quartet & a mixer! Any tips appreciated
/
http://www.sweetwater.com/insync/keith- ... x-unveiled
-
sELF
- Expert
- Posts: 75
- Joined: Mon Jun 03, 2013 4:51 pm
- Location: Berlin/London
-
Contact:
Post
by sELF » Wed Nov 11, 2015 7:04 pm
Bump
![Neutral :|](./images/smilies/icon_neutral.gif)
-
miguelmarcos
- Expert
- Posts: 46
- Joined: Sat Apr 12, 2014 11:23 am
Post
by miguelmarcos » Thu Nov 12, 2015 3:52 pm
I'm looking at the Yamaha MG12 UX myself. I had thought about getting annAudient interface but I think a mixer will be more practical for me.
-
sELF
- Expert
- Posts: 75
- Joined: Mon Jun 03, 2013 4:51 pm
- Location: Berlin/London
-
Contact:
Post
by sELF » Thu Nov 12, 2015 4:28 pm
The Yamaha should have a good sound card! But, I'm still hoping for multi channel output, into Auria. I'm surprised that there are such limited options, mixer wise!
-
Kites
- Expert
- Posts: 50
- Joined: Thu Dec 31, 2015 9:18 pm
Post
by Kites » Tue May 31, 2016 8:26 am
Alright, who's got one on here? The latest update seemed to have fixed iPad issues.
-
geremy
- Member
- Posts: 6
- Joined: Thu Jun 02, 2016 2:20 pm
Post
by geremy » Thu Jun 02, 2016 9:12 pm
Happy to report that with the latest firmware (5/27/2016) the k-mix is working very well. All 8 ins and 10 outs show up in the io matrix. Recording is good. I wish Auria had an 88200 kHz setting!
iPad Air 1, iOS 9.3.2
-
Kites
- Expert
- Posts: 50
- Joined: Thu Dec 31, 2015 9:18 pm
Post
by Kites » Thu Jun 02, 2016 10:27 pm
geremy wrote:Happy to report that with the latest firmware (5/27/2016) the k-mix is working very well. All 8 ins and 10 outs show up in the io matrix. Recording is good. I wish Auria had an 88200 kHz setting!
iPad Air 1, iOS 9.3.2
Does the K-mix work as a surface control for Auria? Been dying to find out.
![Embarassed :oops:](./images/smilies/icon_redface.gif)
-
geremy
- Member
- Posts: 6
- Joined: Thu Jun 02, 2016 2:20 pm
Post
by geremy » Thu Jun 02, 2016 11:02 pm
I would imagine so, as when in midi mode it outputs all buttons/sliders/dials.
-
Kites
- Expert
- Posts: 50
- Joined: Thu Dec 31, 2015 9:18 pm
Post
by Kites » Fri Jun 03, 2016 1:17 am
geremy wrote:I would imagine so, as when in midi mode it outputs all buttons/sliders/dials.
Well, the problem is that Auria Pro only takes Mackie Control, not MIDI.
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
-
geremy
- Member
- Posts: 6
- Joined: Thu Jun 02, 2016 2:20 pm
Post
by geremy » Fri Jun 03, 2016 5:42 am
The k-mix can do some mcu/hcu stuff I believe, but I don't know how much. By default the k-mix transport controls do not work in Auria.
-
Kites
- Expert
- Posts: 50
- Joined: Thu Dec 31, 2015 9:18 pm
Post
by Kites » Sat Jun 04, 2016 8:01 pm
Thanks for checking this out. Crossing my fingers and hoping you get it all working.
-
Corey W
- Expert
- Posts: 568
- Joined: Tue Sep 23, 2014 11:58 am
Post
by Corey W » Mon Jun 06, 2016 1:59 pm
I just heard back from Keith McMillon Instruments and they stated that K-MIX firmware version 1.2.11 brings full iOS compatibility. They also stated that, "Currently, however, Mackie control protocol is only supported on the K-Mix transport buttons."
We should have one soon in the office for testing, so I will report back with any updates.
-
geremy
- Member
- Posts: 6
- Joined: Thu Jun 02, 2016 2:20 pm
Post
by geremy » Tue Jun 07, 2016 11:54 am
Great! I look forward to future developments. I'm loving my k-mix with Auria so far.
-
Kites
- Expert
- Posts: 50
- Joined: Thu Dec 31, 2015 9:18 pm
Post
by Kites » Sat Jun 11, 2016 5:48 am
-
Kites
- Expert
- Posts: 50
- Joined: Thu Dec 31, 2015 9:18 pm
Post
by Kites » Tue Jun 14, 2016 5:10 pm
Corey W wrote:I just heard back from Keith McMillon Instruments and they stated that K-MIX firmware version 1.2.11 brings full iOS compatibility. They also stated that, "Currently, however, Mackie control protocol is only supported on the K-Mix transport buttons."
We should have one soon in the office for testing, so I will report back with any updates.
Hey Corey, did you guys get your K-Mix in yet?
Who is online
Users browsing this forum: No registered users and 81 guests