No sound from 1818vsl
No sound from 1818vsl
There is plenty of signal going in to Auria and I have the ipad volume all the way up. Not getting any sound output back to the 1818 vsl and on to my monitors. Any help appreciated.
Re: No sound from 1818vsl
Hey there, I may be stating the obvious here (if so, sorry!) but are any channels soloed/muted?
Also have you checked the Output Matrix in Auria?
Aaron
Also have you checked the Output Matrix in Auria?
Aaron
Re: No sound from 1818vsl
Nothing appears to be muted or soloed. The output matrix seems OK too. Maybe it's the 1818.
Re: No sound from 1818vsl
Again I may be stating the obvious here (sorry!). Is the light on your 1818 blue or red? Are you getting sound through headphones from either the h'phone input or outputs 7/8 on your 1818?
Aaron
Aaron
Re: No sound from 1818vsl
Sometimes the 1818 needs to be connected to the control software that comes with it (using a PC or a Mac), and all the levels reset in that software. It's possible that one of the masters is turned all the way down in the software.
Rim
Rim
Re: No sound from 1818vsl
Thanks all. Now I can't get the Audiobox software to run, it took an age to get the driver to install and now this. Is the 1818 worth all this hassle?
Re: No sound from 1818vsl
Sorry that you're having issues, but in my case Auria and the Presonus work very well together. I have had little niggles here and there but nothing tragic, it sounds as though your problems may be with the unit itself. Hope you get things sorted.
Re: No sound from 1818vsl
Fixed!
I managed to get the software to run by launching it then switching the 1818 off and on again. This opened the software and it directed me to install new firmware to the unit. Everything working fine now. Got to play around with levels and stuff like that but I'm up and running.
Thanks all for the guidance. This is one of the better places on the Internet
I managed to get the software to run by launching it then switching the 1818 off and on again. This opened the software and it directed me to install new firmware to the unit. Everything working fine now. Got to play around with levels and stuff like that but I'm up and running.
Thanks all for the guidance. This is one of the better places on the Internet
Who is online
Users browsing this forum: No registered users and 182 guests