Hi,
I have Auria Pro and a Korg 1st gen nanoKontrol. I was hoping to be able to click midi learn in the native version of Turnado, wiggle a fader on the nanoKontrol, then record automation of my fader movements. However I can't get past the midi learn step. I long press, click learn, wiggle fader, nothing happens. I have tried setting the nanoKontrol midi settings to Notes In or Control In. Tried setting midi in to its channel, etc. nothing works.
How to midi learn/automate native Turnado
Re: How to midi learn/automate native Turnado
I managed to do that routing the input from a midi track and can confirm that without this workaround it won't work(I used SideCar app for the midi cc but I think any CoreMidi input will do the same):
1.open Auria
2.add one Stereo track with Turnado on fx slot 1
3.add a midi track without any instrument loaded
4.set midi input to Nanokontrol(I think if it is set to all won't change)and out to "track1>Turnado"
5.don't know if this is essential but I did it anyway: put the automation mode to Read&Write
6.long-pressed on a Turnado knob and set to learn mode
7.turned a CC in SideCar
JOB DONE
1.open Auria
2.add one Stereo track with Turnado on fx slot 1
3.add a midi track without any instrument loaded
4.set midi input to Nanokontrol(I think if it is set to all won't change)and out to "track1>Turnado"
5.don't know if this is essential but I did it anyway: put the automation mode to Read&Write
6.long-pressed on a Turnado knob and set to learn mode
7.turned a CC in SideCar
JOB DONE
Who is online
Users browsing this forum: Google [Bot] and 302 guests